Dollar Crimphead (US and Canadian)

Dollar Crimphead works with Shotgun Shell and Flat Style Wrapper


In stock


These Crimping Heads may be purchased here individually. Custom crimping heads are also available by request only. These may be used on the Model  CR (Electric Crimper) and the Model CECR (Electric Counter/Wrapper/Bagger/Crimper).


  • Easy and simple to operate as follows:
  1. Insert Crimping Head into black receiver on machine. “Push and Twist” to ensure crimping head is located and locked in place.
  2. Turn machine “ON”.
  3. For Pre-Crimped “Shotgun Shell” Style Wrappers: Fill wrapper. Be sure coins are firmly stacked against the closed end of wrapper. Press the
    filled coin wrapper firmly against crimping head till the wrapper is tight and a rolled sealhas been formed.
  4. For Flat Style Wrappers:
    We recommend you cut approximately 1/4″ off of one end of the flat wrapper to ensure tight crimping. Fill wrapper. Divide the extra paper evenly on each end. Back one of the open ends with your finger. Press the pre-filled coin wrapper firmly against the crimping head till wrapper is tight and a rolled seal has been formed. Repeat on opposite end.


One-Year Limited Factory Warranty

Complete Warranty Statement

KLOPP International, Inc. (manufacturer) warrants each product of its manufacture to be free from defects in material and workmanship if properly operated and serviced according to manufacturer’s Operating Instructions.

Manufacturer’s obligation under this warranty is limited to correcting without charge for labor or material at its factory any machine, components, or parts thereof which are returned to its factory, transportation charges prepaid, within one year from the date of original purchase of the machine, examination of which discloses to the manufacturer’s satisfaction that the machine, components, or parts thereof are defective.

Each machine shipped from the manufacturer’s factory contains Operating Instructions. Before shipping a machine, component, or parts thereof to the manufacturer for warranty repair, the owner must be certain that the source of difficulty could not be corrected by performing one or more of the procedures described in the Operating Instructions. If manufacturer finds that the source of difficulty could have been corrected by procedures contained in the Operating Instructions, manufacturer reserves the right to make its regular charge for any work performed.

This warranty does not apply to any machine, component, or part thereof which must be replaced because of normal wear and tear or lack of maintenance, which have been subject to misuse, negligence, accident or which have been repaired or altered outside of the manufacturer’s factory, or which contain parts not manufactured or supplied by the manufacturer. Manufacturer is not liable for any loss, damages (including consequential damages) or expense caused from or related in anyway to the use of its products or from any other cause. This warranty supersedes and is given is lieu of all other express or implied warranties, including warranties of merchantability and fitness for a particular purpose. No person of entity is authorized to give or alter any warranties on behalf of the manufacturer. Manufacturer reserves the right to make design and/or operational changes in its products or parts thereof without obligation to incorporate these changes in products previously produced.


These products are shipped Via FedEx Ground Delivery. Allow 4 to 10 business days for this item to ship from the warehouse and a few days on the road with the carrier. If you have special shipping and handling needs, please call us toll free at 855-282-8363 or email us at PLEASE NOTE: Our shipping/delivery quotes are to anywhere in the continental US. This item can only be shipped to the 48 contiguous states. Please call should you require a shipping quote to Hawaii, Alaska, or Puerto Rico. Shipping to other Countries & destinations may also be available. We do not ship to APO/FPO/DPO.